ewp

MPP63 – Complete Floor Systems – Jul 2024
July 30, 2024|Projects
Some homes are large, and then there are some that take this to the next level. A recent project in NSW delivered a Meyer Timber complete floor system for a first floor area of over 620sqm. This included all EWP components as well as flooring,...
Read more
Wet Area Set Downs
October 5, 2023|Guides, Resources, Technical
Changes to the National Construction Code (NCC 2022) mean that set down wet areas will become increasingly common. These include: • A fall in the floor is now required to all floor wastes, including non- mandatory wastes. • The fall in the floor has been...
Read more
September 2023 – meySPAN Specifications QLD
August 29, 2023|Guides, Resources, Technical
The LVL range is manufactured in accordance with AS/NZS 4357.0:2005 Structural Laminated Veneer Lumber. Characteristic Design Values have been determined in accordance with AS/NZS 4063.2:2010 Section 4.
Read more
September 2023 – meySPAN Specifications NSW
December 21, 2022|Guides, Resources, Technical
The LVL range is manufactured in accordance with AS/NZS 4357.0:2005 Structural Laminated Veneer Lumber. Characteristic Design Values have been determined in accordance with AS/NZS 4063.2:2010 Section 4.
Read more
September 2023 – meySPAN Specifications Vic & Tas
April 11, 2022|Guides, Resources, Technical
The LVL range is manufactured in accordance with AS/NZS 4357.0:2005 Structural Laminated Veneer Lumber. Characteristic Design Values have been determined in accordance with AS/NZS 4063.2:2010 Section 4.
Read more
LVL Compliance
March 1, 2022|Factsheets, Guides, Resources
There are a lot of new LVL products coming into the market and many of them are being integrated into the supply chain, but how do you know they comply with Australian Standards?
Read more
OS’Brace® SUBSTITUTION
January 31, 2022|Guides, Resources, Technical
This note provides information on the direct substitution of OS'Brace for plywood and hardboard bracing specified in AS 1684.
Read more
Storage, handling & protection
April 28, 2021|Guides, Resources, Technical
• should be stored flat on bearers (maximum 4m apart) and on a dry loadbearing surface. Place on top of a polythene sheet or similar if the ground surface is damp. • should be protected from moisture during transport, storage and throughout the building phase,...
Read more
Lamination of LVL
February 26, 2021|Guides, Resources, Technical
Lamination of LVL Fastener Type Fastener Type Fastener Type Diameter Diameter Diameter Length Length Length Spacing Spacing Spacing Min. Edge Distance Min. Edge Distance Min. Edge Distance Nail Nail Nail Screw Screw Screw Screw Screw Screw Bolt Bolt Bolt 14g 14g 14g SDWS SDWS SDWS...
Read more
FAQ on OSB
July 28, 2020|Guides, Resources, Technical
FAQ on OSB
Read more