STANDARDS AND QUALITY

The meySPAN LVL range is manufactured in accordance with AS/NZS 4357.0:2005 Structural Laminated Veneer Lumber. Characteristic Design Values have been determined in accordance with AS/NZS 4063.2:2010 Section 4.

Veneer Species: Varies
Natural Durability: Class 4 to AS 1684:2010
Joints: Scarf or lap
Moisture Content: 8-15%
Adhesive: Type ‘A’ Phenolic adhesive.
Finish: Unsanded faces, Sawn/Arris edges
Treatment: H2S (glueline) to AS/NZS 1604.4
Colour: Yellow
TOLERANCES
Length (L): -10, +30mm
Width (W): < 400: -0, +2mm
≥ 400: -0, +5mm
Thickness (T): <63: -1, +1mm
≥63: -1, +3mm
Spring and bow: <1/1000
Squareness: (L x W)/(3500T)
Cupping: No limit
Formaldehyde Emissions: <E0 (0.5mg/L)


Notes:
1. Width and thickness will increase at higher moisture content (MC). They will return towards acceptable levels once MC reduces but may not fall into above tolerances if exposed to high MC.
2. Cupping is usually a result of moisture gradient across the thickness caused by weather exposure and not manufacturing.
3. meySPAN should be stored and handled so as to allow for satisfactory long term performance.

Refer meySPAN – Storage, handling and protection flyer for further information

Storage and Handling GuideLVL LaminationSpecification Sheet (print version of this page)SDSDesign Software
Range & Availability
meySPAN13 (MT-LVL E13)
SECTION WIDTH Section Thickness
35 45 63 75
90
130
150
170
200
240
300
360
400
450
525
meySPAN14 (MT-LVL E14) in 45mm thick only
meySPAN15 (MT-LVL E15) in 35mm thick only
SECTION WIDTH Section Thickness
35 (e15) 45 (e14)
90
120
140
190
240
290
AVAILABILITY
VIC/TAS/NSW/QLD
VIC/TAS ONLY
NSW/QLD ONLY