About meyPINE3Pre-Primed H3 Treated Timber

meyPINE3 is a pre-primed, H3 LOSP treated Radiata pine timber engineered for above-ground outdoor construction. Laminated and finger-jointed for a defect and knot-free finish, it arrives dressed all round and factory primed — reducing on-site labour and getting you to topcoat faster. Available in structural and non-structural sections to suit a wide range of residential applications.

Radiata pine construction, laminated and finger-jointed for a consistent, knot-free finish
Suitable for above-ground outdoor use up to N3 wind classification
Pre-primed with architectural paint — ready for final topcoats on site
Range of sizes to suit joists, bearers, rafters, beams, posts and battens
H3 LOSP treated for protection against termites, rot and decay
Dressed all round (DAR) for a smooth, paint-ready surface
meyPINE3 Specifications

meyPINE3 is ideal for verandah and roof beams, rafters, floor joists and bearers, posts, and a broad range of above-ground outdoor framing applications. Suited to residential construction where structural performance and aesthetics both matter — arriving pre-primed and ready for final topcoats without compromising on strength or finish quality.

SPECIFICATIONS:

  • Radiata pine construction, laminated and finger-jointed for a consistent, knot-free finish
  • Dressed all round (DAR) for a smooth, paint-ready surface
  • Pre-primed with architectural paint — ready for final topcoats on site
  • H3 LOSP treated for protection against termites, rot and decay
  • Suitable for above-ground outdoor use up to N3 wind classification
  • Available in structural and non-structural sections
  • Range of sizes to suit joists, bearers, rafters, beams, posts and battens
Structural framing

F7 grade

Structural beams

GL10 grade

Posts

GL8 grade

90 × 42 mm 140 × 65 mm 88 × 88 mm
138 × 42 mm 180 × 65 mm 112 × 112 mm
185 × 42 mm 240 × 65 mm 135 × 135 mm
230 × 42 mm 290 × 65 mm 185 × 185 mm
280 × 42 mm 320 × 65 mm
360 × 65 mm
Common Applications

meyPINE3 structural sections are suitable for use across a range of residential applications including:

  • Floor joists and bearers
  • Roof rafters, hip/valley rafters and battens
  • Roof beams and ridge beams
  • Verandah beams
  • Posts supporting roof and floor loads

For span and loading information, download the meyPINE3 Handy Span Guide.

Documentation and Resources

For more information regarding Installation, Storage and Handling and Best Practices, Refer to our Specification and User Guide

Specification and User GuideWarranty & InstallationSpan Tables