hyjoist

Wet Area Set Downs
October 5, 2023|Guides, Resources, Technical
Changes to the National Construction Code (NCC 2022) mean that set down wet areas will become increasingly common. These include: • A fall in the floor is now required to all floor wastes, including non- mandatory wastes. • The fall in the floor has been...
Read more
Strong-Wall® Site-Built Portal Frame System
July 28, 2020|Guides, Resources, Technical
Strong-Wall® Site-Built Portal Frame System 1300 STRONGTIE | strongtie.com.au 2 | Strong-Wall® Site-Built Portal Frame System 1300 STRONGTIE | strongtie.com.au F-L-PFSAU20 © 2020 Simpson Strong-Tie Company Inc. Strong-Wall® Site-Built Portal Frame System The Strong-Wall site-built portal frame system (PFS) provides designers, builders and contractors an...
Read more
Wall Frame Tie-down Specification
June 28, 2020|Guides, Resources, Technical
A complete solution for N2 wind – sheet roof - studs @ 450 c/c – trusses @ 600 c/c – SINGLE storey
Read more
QuikStick™ Rafter And Truss Fastening System
May 25, 2020|Guides, Products, Resources, Technical
QuikStick™ Rafter And Truss Fastening System
Read more
meyJOIST Product Manual
May 11, 2020|Engineered Range, Guides, I Beams, Products, Resources, Technical
meyJoist Product Manual
Read more
Points to minimise the potential of Floor Squeaks
April 17, 2020|Guides, Resources, Technical
POINTS TO MINIMISE THE POTENTIAL OF FLOOR SQUEAKS
Read more
Durability of Meyer Timber Engineered Wood Products Including LVL, I-joist and Glulam
November 22, 2019|Guides, Resources, Technical
Untreated Engineered Wood Products (EWP) are suitable for use as structural members in protected, dry environments. They can also be impregnated with chemicals to increase their durability against various hazards. The hazard levels as defined in AS/NZS 1604 (and AS1684) are shown...
Read more
How to deal with Construction Loads
November 1, 2019|Factsheets, Resources, Technical
November 2019 Construction loads can be defined as those loads imposed on a partially completed structure during and as a result of the construction process. These loads may include, but are not limited to, materials, personnel, and equipment placed onto a structure which has not...
Read more
Alternative fixing methods for Meyer Timber brackets
October 28, 2019|Guides, Resources, Technical
Numerous brackets supplied by Meyer Timber are supplied with 3.75Øx35mm long nails for fixing. This is a minimum requirement as noted in the installation guide but it does not preclude the use of alternate connectors. This technical note outlines other suitable connectors that may be...
Read more
CCN64 Collated Connector Nailer
August 29, 2019|Guides, Resources
Save time and money with fast connector nailing! Helps with the correct installation of connectors • Faster than traditional hand nailing • Nail tip protudes to easily locate connector hole • Multi-blow action hammers in, and helps prevent the nail from being overdriven • Compact...
Read more