STANDARDS AND QUALITY

The meySPAN LVL range is manufactured in accordance with AS/NZS 4357.0:2005 Structural Laminated Veneer Lumber. Characteristic Design Values have been determined in accordance with AS/NZS 4063.2:2010 Section 4.

Veneer Species: Varies
Natural Durability: Class 4 to AS 1684:2021
Joints: Scarf or lap
Moisture Content: 8-15%
Adhesive: Type ‘A’ Phenolic adhesive.
Finish: Unsanded faces, Sawn/Arris edges
Treatment: H2S (glueline) to AS/NZS 1604.1:2021
Colour: Yellow (with moisture barrier)
RANGE

mey    (MT-LVL E13)

SECTION WIDTH Section Thickness
45 75 75
90

130

150

170

200

240

300

360

400

450

600

Availability

NSW / QLD / VIC / TAS
VIC / TAS ONLY
NSW / QLD ONLY

mey    (MT-LVL E14) in 45mm thick only
mey(MT-LVL E15) in 35mm thick only

SECTION WIDTH Section Thickness
35 (E15) 45 (E14)
90

120

140

190

240

290

Availability

NSW / QLD / VIC / TAS
VIC / TAS ONLY
TOLERANCES
Length (L): -10, +30mm
Width (W): < 400: -0, +2mm
≥ 400: -0, +5mm
Thickness (T): <63: -1, +1mm
≥63: -1, +3mm
Spring and bow: <1/1000
Squareness: (L x W)/(3500T)
Cupping: No limit
Formaldehyde
Emissions:
<E (0.5mg/L)

Notes:
1. Width and thickness will increase at higher moisture content (MC). They will return towards acceptable levels once MC reduces but may not fall into above tolerances if exposed to high MC.
2. Cupping is usually a result of moisture gradient across the thickness caused by weather exposure and not manufacturing.
3. meySPAN should be stored and handled so as to allow for satisfactory long term performance. Refer meySPAN – Storage, handling and protection flyer for further information.

HANDY LINKS
Storage and Handling GuideLVL LaminationSDSDesign SoftwareQLD - Specification Sheet September 2023NSW - Specification Sheet September 2023Vic & Tas - Specification Sheet September 2023