Glulam

September 2023 – meySPAN Specifications QLD
|, ,
The LVL range is manufactured in accordance with AS/NZS 4357.0:2005 Structural Laminated Veneer Lumber. Characteristic Design Values have been determined in accordance with AS/NZS 4063.2:2010 Section 4.
Read more
September 2023 – meySPAN Specifications NSW
|, ,
The LVL range is manufactured in accordance with AS/NZS 4357.0:2005 Structural Laminated Veneer Lumber. Characteristic Design Values have been determined in accordance with AS/NZS 4063.2:2010 Section 4.
Read more
September 2023 – meySPAN Specifications Vic & Tas
|, ,
The LVL range is manufactured in accordance with AS/NZS 4357.0:2005 Structural Laminated Veneer Lumber. Characteristic Design Values have been determined in accordance with AS/NZS 4063.2:2010 Section 4.
Read more
MPP35 – Magna Glulam Merbau Pergola in South Australia – Nov 2021
|
Meyer Timber has saved the day by supplying Magna Glulam product for a pergola structure in Adelaide. The pergola had sizing constraints which meant that from a durability and design perspective the only suitable timber product was Magna Glulam. A satisfied Peter Graham (Project Engineer)...
Read more
Storage, handling & protection
|, ,
• should be stored flat on bearers (maximum 4m apart) and on a dry loadbearing surface. Place on top of a polythene sheet or similar if the ground surface is damp. • should be protected from moisture during transport, storage and throughout the building phase,...
Read more
Lamination of LVL
|, ,
Lamination of LVL Fastener Type Fastener Type Fastener Type Diameter Diameter Diameter Length Length Length Spacing Spacing Spacing Min. Edge Distance Min. Edge Distance Min. Edge Distance Nail Nail Nail Screw Screw Screw Screw Screw Screw Bolt Bolt Bolt 14g 14g 14g SDWS SDWS SDWS...
Read more
Durability of Meyer Timber Engineered Wood Products Including LVL, I-joist and Glulam
|, ,
Untreated Engineered Wood Products (EWP) are suitable for use as structural members in protected, dry environments. They can also be impregnated with chemicals to increase their durability against various hazards. The hazard levels as defined in AS/NZS 1604 (and AS1684) are shown...
Read more
How to deal with Construction Loads
|, ,
November 2019 Construction loads can be defined as those loads imposed on a partially completed structure during and as a result of the construction process. These loads may include, but are not limited to, materials, personnel, and equipment placed onto a structure which has not...
Read more
MPP09 – Merbau Kit Sets – Feb 2018
|
With the Hundegger TURBO-Drive at Meyer Timber we are now offering machining options that range from precision docked to length members to full cutting and drilling of projects such as pergola “kit sets”. See the Project Profile attached, where a gable truss Merbau pergola was...
Read more
Magna Glulam Brochure
|,
Magna glulaM™ timber is attractive, strong, durable, hard and stays straight. Made from sustainable supplies of Merbau (Kwila) timber utilising off-cuts to make the resource go further. Made from a legal and sustainable resource. Manufactured and graded to Australian Standards. Third party quality assurance scheme...
Read more